UV Disinfection Units

Orenco® UV Disinfection Units are designed for residential applications after advanced secondary treatment (10 mg/L or less for CBOD5 and TSS) when disinfection is required before dispersal. They require installation inside a pump basin, gravity discharge basin, or a separate tank following an advanced secondary treatment system. The power ballast, current sensor, and controls are housed externally, to protect electronic components from environmental damage.

  • UL-recognized for US and Canada
  • 125 µW/cm2 lamp output
  • Maximum contact time between lamp and effluent
  • Reduction of bacteria by 5 logs (99.999%)
  • Quick-disconnect fitting for easy inspection and unit cleaning
  • Teflon sleeve to protect lamp and minimize buildup and service intervals
  • Power ballast and lamp current sensor housed in control panel
    (not in wet well) to minimize failure due to environmental exposure
  • Integrated components and controls — no piecemeal assemblies
    and wiring
  • 25- or 50-ft (7.6- or 15.2-m) power cord length

 

Product Codes

  • UV-125/31-UVIB — UV disinfection unit, 125 µW/cm2 output, 
    31-in. (787-mm) lamp length, control panel with audible/visible alarms, 25-ft (7.6-m) power cord
  • UV-125/31-UVIB-50 — UV disinfection unit, 125 µW/cm2 output,
    31-in. (787-mm) lamp length, control panel with audible/visible alarms, 50-ft (15.2-mm) power cord
  • UV-125/31-UVIBSUB — UV disinfection unit, 125 µW/cm2 output,
    31-in. (787-mm) lamp length, sub-panel for use with separate control panel, 25-ft (7.6-m) power cord
  • UV-125/31-UVIBSUB-50 — UV disinfection unit, 125 µW/cm2 output,
    31-in. (787-mm) lamp length, sub-panel for use with separate control panel, 50-ft(15.2-mm) power cord
     

Technical Data Sheet
 

Product Sheet

Orenco UV-125/31-UVIB Ultraviolet Disinfection Unit