Submit

AdvanTex Treatment Systems

Home Internationalbreadcrumb separatorAdvanTex Treatment Systems

Complete Residential, Community, and Commercial Systems

Orenco Systems, Inc. was incorporated in 1981, founded by engineers focused on providing intelligent, high-quality, sustainable solutions for wastewater management. The company has grown from its original base in the northwestern United States to become a global company doing business around the world. Our technologies are appropriate for both developed and developing countries, with an emphasis on natural processes, low energy requirements, and simple operation and maintenance needs.

AdvanTex® AX20 Treatment Systems

Orenco’s AdvanTex® Treatment Systems are the ideal solution for environmentally sustainable treatment of residential wastewater flows. Orenco’s AdvanTex AX20 units are a dependable, proven technology for treating residential septic tank effluent to better-than-secondary standards, including nitrogen-reduction. AX20 treatment pods are sturdy, watertight fiberglass basins filled with lightweight, highly absorbent, engineered textile media that treats a tremendous amount of wastewater in a small space.

Applications

AX20 Treatment Systems are primarily intended for residential applications that require advanced secondary treatment, including new installations, retrofits, or repairs. They’re also used in small commercial applications. AX20 units are ideal for sites with poor soils and small sites, especially those that require a compact “filter on top of tank” configuration.

Flows

A single AdvanTex AX20 pod treats wastewater flows of up to 500 gpd (1890 L/day). AdvanTex Treatment Systems are modular, however, and can be installed in multi-pod arrays to handle higher flows.

AdvanTex® AX-RT Treatment Systems

Orenco’s AdvanTex® AX-RT Treatment Systems are a dependable, proven technology for treating residential septic tank effluent to better-than-secondary standards, including nitrogen-reduction. AX-RT treatment units consist of sturdy, watertight fiberglass basins that incorporate recirculation-blend tankage and discharge tankage into a single module, along with lightweight, highly absorbent, engineered textile media that treats a tremendous amount of wastewater in a small space. One model — the AX15-RT3 — also incorporates primary tankage.

Applications

AX-RT Treatment Systems are intended for small-flow applications that require advanced secondary treatment, including new installations, retrofits, or repairs. They eliminate the need for separate recirculation and discharge tanks by performing both functions within a single module and are ideal for sites with shallow-bury requirements, sites with poor soils, or sites with small lot sizes. The AX15-RT3 also eliminates the need for primary tankage.

Flows

AX-RT units treat wastewater flows of up to 500 gpd (1890 L/day) for the AX20-RT or 625 gpd (2365 L/day) for the AX25-RT. However, AdvanTex Treatment Systems are also modular. With proper flow-splitting, they can be installed in multi-unit arrays to handle higher flows.

AdvanTex® AX100 Treatment Systems

Orenco’s AdvanTex® AX100 Treatment Systems are a dependable, proven technology for treatment of primary-treated effluent to better-than-secondary standards, including nitrogen-reduction. AX100 treatment units consist of sturdy, watertight fiberglass basins filled with a lightweight, highly absorbent, engineered textile media that treats a tremendous amount of wastewater in a small space.

Applications

AX100 Treatment Systems are intended for large residential applications or commercial and municipal applications that require advanced secondary treatment. They’re also an excellent choice for decentralized settings, including new installations, retrofits, or repairs. AX100s are ideal for subdivisions, “fringe” development, hotels, resorts, schools, churches, businesses, manufactured home parks, RV parks, campgrounds, rest areas, and truck stops.

Flows

A single AdvanTex AX100 pod can treat flows of up to 5000 gpd (18,927 L/day). AdvanTex Treatment Systems are modular, however, and can be installed in multi-pod arrays to handle higher flows.

AdvanTex® AX-Max™ Treatment Systems

Orenco’s AdvanTex® AX-Max™ Treatment Systems are a dependable, proven technology for primary-treated effluent to better-than-secondary standards, including nitrogen-reduction. They consist of sturdy, watertight fiberglass tanks that incorporate recirculation-blend and discharge tankage in a single module. Each complete, pre-manufactured unit also includes pumping systems, ventilation, and a lightweight, highly absorbent, engineered textile media that treats a tremendous amount of wastewater in a small space.

Applications

AX-Max Treatment Systems are intended for large-flow sites such as commercial and community applications that require advanced secondary treatment. They eliminate the need for separate recirculation and discharge tanks by performing both functions within a single module. AX-Max units are ideal for subdivisions, “fringe” development, hotels, resorts, schools, churches, businesses, manufactured home parks, RV parks, campgrounds, rest areas, and truck stops.

Flows

Depending on model, a single AdvanTex AX-Max unit can treat flows of 5000-15,000 gpd (18.9-56.8 m3/day). AdvanTex Treatment Systems are modular, however, and can be installed in multi-unit arrays to handle higher flows.

AdvanTex® AX-Mobile™ Treatment Systems

Orenco’s AdvanTex® AX-Mobile™ Treatment Systems are a portable, proven technology for primary-treated effluent to better-than-secondary standards, including nitrogen-reduction. They consist of a sturdy, fully-plumbed and prewired, watertight fiberglass tank incorporating recirculation-blend and discharge tankage into a single module. Units include pumping systems, ventilation, and a lightweight, highly absorbent, engineered textile media that treats a tremendous amount of wastewater in a small space.

Applications

AX-Mobile Treatment Systems are intended for remote or temporary wastewater treatment applications requiring advanced secondary treatment, including work camps, forward operating bases, disaster relief and temporary flow diversions. They eliminate the need for separate recirculation and discharge tanks by performing both functions within a single unit. Multiple units can be arranged to accommodate larger flows, and units incorporating primary treatment tankage are available.

Flows

Depending on the model chosen, a single AdvanTex AX-Mobile unit can treat flows of 5000-15,000 gpd (18.9-56.8 m3/ day).

AdvanTex® Greywater Treatment Systems

Orenco offers a variety of AdvanTex® Greywater Treatment Systems suitable for a wide range of flows. For example, the AdvanTex AX10-RTUV is designed for commercial and residential small-flow applications. Each AX10-RTUV is a single, complete, self-contained module that treats greywater to reuse standards before pump or gravity discharge. Units feature the same dependable, efficient AdvanTex textile media used in our wastewater treatment systems.

After AdvanTex treatment, greywater flows by gravity through the contact chamber and around a UV lamp, where it is disinfected. The UV unit uses no chemicals and has no moving parts. In side-by-side NSF® testing, the Orenco UV unit meets or exceeds the performance of other residential UV disinfection systems.

AdvanTex Greywater Treatment Systems are also quiet, low-odor, and low-profile ... so they can blend right into the landscaping. Larger greywater systems are available on a custom-order basis.

Recent Comments

“I’ve always liked the proactive approach that Orenco takes. I have two criteria regarding any product specifications: the product does the job and the company provides technical support. Orenco excels in both, which makes me look good and my clients happy.”

– David Monihan, Jr., P.E., RLS

Project Profiles

Tourism

Mobile Systems

Reuse and Recycling

Planned Communities

Municipalities

Housing

Toilet Blocks

Carvan Parks and Campsites

Meet Our Team

Orenco’s International Team has decades of experience with import/export processes. Our well-traveled staff is sensitive to cultural differences, and we apply proven engineering standards and solid business knowledge to ensure successful projects and strong relationships. We also offer value-added services such as assisting with product approval, design review, drafting, third-party equipment procurement, logistics, and training. Our distribution network includes about 300 points of distribution in North, Central, and South America, Europe, Africa, Australasia, and Southwest Asia. We directly manage projects in areas where distribution has not yet been established.

Geoff Salthouse

Int'l Business Manager

Africa, Asia, Middle East, and all General Inquiries

+1 (541) 459-4449 ext. 209
Email >

 

Bill Hensley

Int’l Territory Manager

Australasia, Europe

+1 (541) 459-4449 ext. 423
Email >

Richard Jex, PE

Int’l Territory Manager

Central & South America

+1 (541) 459-4449 ext. 485
Email >

David Lepre, PE

Sales Engineer

+1 (541) 459-4449 ext. 481
Email >

Dave Norlin

Technical Support

+1 (541) 459-4449 ext. 208
Email >